BUKH DV 48 ME - TECHNICAL DATA

 

A powerful BUKH engine with modest fuel consumption and relatively small outside
dimensions. BUKH's thorough technology ensures the same noiseless and vibration-free operation for which our smaller engines are renowned. The turbo 48 can offer these advantages to larger boats and make them better boats.

Max continuous rating  (DIN 6270B) at:  
60 rps (3600 rpm) 48 HP (35.8 kW)
50 rps (3000 rpm) 42.4 HP (31.6 kW) 
40 rps (2400 rpm) 31.5 HP (23.5 kW)
Reverse-reduction gear ratio 2:1 (standard)
Engine rotation (looking forward) Anti-clockwise
Propeller rotation (looking forward) Clockwise
Number of cylinders 3
Bore x stroke 3.35 x 3.35 in 
85 x 85 mm
Swept volume 88.29 cu in (1447 cm³) 
Operating principle 4-stroke, diesel 
Cooling system (standard) Seawater
Max inclination, fore and aft 15°
Max heel, continuous 30°
Fuel consumption, full load 60 rps 2.62 galls/h (9.9 l/h)
Fuel consumption, cruising 1.45 galls/h (5.5 l/h)
Electric starter motor 12V - 1.74 HP (1.3 kW) 
Charging alternator 14V, 50Amp, 700W 
Net weight 602 lbs (273 kg)
Net weight including freshwater cooling 646 lbs (293 kg)

STANDARD EQUIPMENT: 
Turbocharger 
Reverse-reduction gear 
Wet sump lubrication system 
Pre and main (full flow) filter 
Bosch distributor injection pump with automatic timing device and governor 
Automatic ventilation of fuel system 
Seawater cooling with thermostat 
Water cooled exhaust manifold 
Lubricating oil cooler 
Air inlet filter and silencer 
Fuel lift pump 
Electric start and charging alternator  
Remote operating panel with: Charging light, luboil pressure warning light, cooling water  
temperature warning light, key switch for start and stop and audible warning  
Fittings for remote control 
Zinc anode protection 
Standard set of tools 
Drain pump for luboil  
Flexible engine mounts 
Water cooled exhaust bend 
Operating manual

 



Click right side of Picture Click Images